产品内页 - Renda Steel Group Co., Ltd.





ASTM A573 Carbon steel bar

Product introduction and parameters

ASTM A573 Carbon Steel bar is a standard specification for high-strength, low-alloy steel used in the manufacture of structural elements. The standard specifies a variety of different grades and thickness ranges of A573 steel, including carbon content, silicon content, phosphorus content, sulfur content, manganese content, niobium content, vanadium content and other chemical composition and mechanical properties.
ASTM A573 carbon steel rods are low in carbon and silicon and can meet the requirements of different application scenarios. It has high strength and good welding performance, and can be used in the manufacture of various mechanical parts and structural parts, such as Bridges, building structures, ships, aerospace and other fields. In addition, ASTM A573 carbon steel rods also have good laminar tear resistance, which can meet the needs of some special applications.
The ASTM A573 carbon steel rod grade is denoted as "A573Gr", where the "G" indicates that it is a high-strength low-alloy steel and the "r" indicates that it is a steel with good weldability. For example, A573Gr60 indicates that the steel has a yield strength of 600 MPa.
In short, ASTM A573 carbon steel bar is a high-strength, low-alloy steel with good weldability and lamellar tear resistance, which is widely used in the manufacture of various mechanical parts and structural parts.

fications	Dimensions16-400mm，etcLength:2000-12000mm，or as required	Certification:	ISO, SGS，BV，Mill Certificate
Standard:	ASTM，AISI，JIS，GB， DIN，EN	Technique	Cold/Hot rolled, Cold-Drawn， or Hot Forged
Surface treatment	Black/Peeling/Polishing/Machined	Heat Treatment	Annealed; Quenched; Tempered
Material	A53,A283,A106-A,A179,A214-C,A192,A226,A315,A106,A178
	Q195,Q235,Q275,10#,15#20#，
	20GSTPG38,STS38,STB,30,STS42,STB42STB35，
	SS400ST33,ST37,ST35.8,ST42,ST45-8,ST52
price terms	FOB,CRF,CIF,EXW all acceptable	Delivery Detail	inventory About 3-5；
			custom-made 15-20；
			According to order's quantity.
standard export packing	inside:water proof paper,outside:steel covered with strips and pallets
Container size	20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High)
	40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High)
	40ft HC:12032mm(Length)x2352mm(Width)x2698mm(High)

Material introduction

Carbon steel is an iron-carbon alloy with a carbon content of 0.0218% to 2.11%, also known as carbon steel.

Generally also contains a small amount of silicon, manganese, sulfur, phosphorus.

The American Iron and Steel Institute (AISI) defines carbon steel as having no specified or required minimum content of chromium, cobalt, molybdenum, nickel, niobium, titanium, tungsten, vanadium, zirconium, or any other element to be added to obtain the desired alloying effect; The prescribed minimum content of copper shall not exceed 0.40%; Or the specified xxx content does not exceed the indicated percentage for any of the following elements: Manganese 1.65%; Silicon 0.60%; Copper 0.60%.

Carbon steel is a popular knife-making metal choice because it contains a lot of carbon, giving blades better edge retention. In order to make full use of this steel, it is very important to give it a proper heat treatment.

Product application

Each batch of our products will be subjected to strict quality testing before leaving the warehouse, we can also accept your designated third party testing agency for quality inspection and quality certificate, to ensure that all products do not have quality problems and can be perfectly applied to various fields.

Certificate authentication

Our steel products have undergone strict quality inspection and testing, in line with relevant national and international standards, and obtained a variety of certifications, such as CE certification, EN10204 certification, ISO9001 certification. These certifications are the recognition and guarantee of the quality of our products, and are also the basis for customers to trust us.

Product testing

We have advanced production processes and technologies, such as continuous casting and rolling, heat treatment, surface treatment, etc., which can greatly improve the performance and quality of steel products. We constantly update and improve the production process and technology to meet the changing market demand we carry out strict quality inspection and testing for each batch of products, including size, shape, mechanical properties, chemical composition and other aspects of the test. We have advanced testing equipment and professional testing personnel to ensure that every link of the product meets the relevant standards and customer requirements.

{{title}}